The 2,106 domestic wells on file within 5 miles of Washingtonville, from the state’s drilling logs: your neighbors’ wells, and the best guide to this ground.
Source: ODNR well logs, domestic wells within 5 miles, retrieved 2026-09-30.
Salem’s Water in Washingtonville’s Mains
Washingtonville's village system is small: about 801 people and 338 connections on EPA’s record, with one storage tank. Its water is purchased surface water from Salem City, which the record marks as filtered, and no treatment steps are listed for the village itself, so the record doesn’t say whether anything is added locally. The village’s water report covers homes on it.
All lead rounds on record, 2016 to 2025, came in under the 0.015 mg/L action level, and 2021 and 2023 are recorded as zero. Those are system-wide results; your own tap can differ. A water test at your tap is where to start, and should it find lead, reverse osmosis at the kitchen sink handles it.
A 34-Foot Water Level Around Washingtonville
Across 1,889 local logs, water at rest stands a median 34 feet down, within 20 feet in a quarter of wells and no deeper than 54 in three of four. That’s a short lift for the pump, with a good column of water above it once it’s set below the level.
Yields match: half the logs record 15 gallons per minute or more and a quarter 25 or more. The median well is 120 feet deep, with bedrock a median 34 feet down, where the casing seats. A standard submersible pump and pressure tank sized to the household fit most wells here, and a well inspection checks an older system against these figures.