The 1,018 domestic wells on file within 5 miles of Portersville, from the state’s drilling logs: your neighbors’ wells, and the best guide to this ground.
Source: PaGWIS (PA DCNR), domestic wells within 5 miles, retrieved 2026-09-30; older paper-record locations are approximate.
Budgeting for Butler County’s Deepest Median
Plan for a deep well around Portersville. Of the 1,018 depth logs within 5 miles, three in four reached 125 feet or more and a quarter went beyond 253, and by median depth the town comes first of the 21 Butler County towns on our map.
Depth is one of the biggest drivers of what a new well costs, so it pays to talk through the range before drilling: what the estimate assumes, how extra footage is handled, and when the driller will stop. The bore stops once it has crossed enough water for the house, and here that has typically taken more footage than around any other town on our Butler County list. Residential well drilling explains how that decision is made at the rig.
Soil and Rock Under Portersville
Before the rock, there’s soil. Drillers in the area logged bedrock at a median 20 feet, a quarter within 10 and a quarter at 34 or deeper. Casing usually runs from the surface down to rock, so on the deeper-soil lots it’s a longer run and a bigger line on the estimate.
Below it, geologic maps show the Allegheny Formation at the town center, with its Pennsylvanian sandstone, shale, limestone, clay and coal. Yields in the logs are moderate, 12 gallons per minute at the median, so a long bore’s stored water does real work during heavy use. A submersible pump sized to the measured yield, with a pressure tank that limits starts, suits that setup.